the connor-winfield corp . 2111 comprehensive drive. aurora, il 60505.fax (630) 851-5040. phone (630) 851-4722. http://www.conwin.com product da t a sheet specifications subject to change without notice. data sheet #: rev: date: page of copyright 2001 connor-winfield all rights reserved. a cr yst al controlled oscilla tors the connor-winfield CWX815 is a 5.0v, hcmos, 7.5x5mm, surface mount, fixed frequency crystal oscillator (xo) designed for use in applications requiring high stability and low jitter. the surface mount package is designed for high- density mounting and is optimum for mass production. 1 2 CWX815 - 100.00 mhz clock series center frequency 1 mhz to 156.25 mhz 5.0v operationfrequency tolerance: 25ppm temperature range: -20 to 70c low jitter: >1 ps rms tri-sta te enable / disable ceramic surface mount p ackage tape and reel packaging 5 . 0 v 7 . 5 x 5 m m f i x e d f r e q u e n c y o s c i l l a t o r sm110 00 7/28/04 ordering information features description c w x 8 1 5 1 0 0 .0 0 m 0 4 2 6 c w x 8 1 5 1 0 0 .0 0 m 0 4 2 6 CWX815 c w x 8 1 5 1 0 0 . 0 0 m 0 4 2 6 c w x 8 1 5 1 0 0 . 0 0 m 0 4 2 6 (4.80.2mm) (4.80.2mm) (1 .0 . 1 15 m m ) (1 .0 . 1 15 m m ) (2. 60 mm ) (2. 60 mm ) (5. 08 mm ) (5. 08 mm ) (1. 40 mm ) (1. 40 mm ) (7.30.2mm) (7.30.2mm) .189.007 .189.007 .04..00 4 .04..00 4 .102 .102 .200 .200 .055.055 .287.007 .287.007 absolute maximum ratings table 1.0 parameter units minimum nominal maximum units note storage temperature - 55 - 125 c supply voltage (vcc) - 0.5 - 7.0 vdc operating specifi cations table 2.0 parameter minimum nominal maximum units note frequency range (fo) 1.00 - 100.00 mhz additional frequencies available 106.25, 125.00, 155.52 and 156.25 mhz frequency tolerance - 25 - 25 ppm 1 operating temperature range - 20 - 70 c supply voltage (vdd) 4.5 5.0 5.5 vdc supply current (icc) - - 45 ma input characteristics table 3.0 enable voltage (vih) > 2.2 - - vdc 2 disable voltage (vil) - - < 0.8 vdc hcmos output characteristics tab le 4.0 parameter minimum nominal maximum units note load - - 50 pf voltage (high) (voh) 4.5 - - vdc (low) (vol) - - 0.4 vdc current (high) (ioh) - 8 - - ma (low) (ioh) - - 8 ma duty cycle at 50% of vcc 40 50 60 % rise / fall time 20% to 80% - 2 6 ns start - up time - - 10 ms jitter (bw=10hz to 20mhz) - - 5 ps rms jitter (bw=12khz to 20mhz) - - 1 ps rms note: 1) inclusive of calibration @ 25 c , frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 10 years aging. 2) oscillator output is enabled with no connection on pad 1 package characteristics table 5.0 package her metically sealed ceramic package s tandard frequencies available (mhz) table 6.0 1.544 1.8432 2.048 3.6864 4 5 6.48 10 11.0592 12 12.288 14.31818 15.36 16 16.896 19.44 20 24 24.576 25 27 29.498928 29.4912 30 32.768 33 33.33 36 40 44.736 48 49.152 50 60 66 75 80 100 106.25 125 155 .52 156.25 table 7.0 pad connection 1 enable/disable 2 ground 3 output 4 vcc table 8.0 enable / disable function output pin 1 open pin 3 active pin 1 > 2.2v pin 3 active pin 1 < 0.8v pin 3 high impedance
the connor-winfield corp . 2111 comprehensive drive. aurora, il 60505.fax (630) 851-5040. phone (630) 851-4722. http://www.conwin.com product da t a sheet specifications subject to change without notice. data sheet #: rev: date: page of copyright 2001 connor-winfield all rights reserved. a cr yst al controlled oscilla tors 2 2 sm110 00 7/28/04
|
